Dynamic Simulink Report
Using the Report Generator to Document Changes
Simulink User
01-Sep-2000
Model - vdp
This is a demonstration of the Report Generator's ability to experiment with Simulink systems and auto-document the results. In this report, we will load the model vdp and simulate it 5 times. The report will modify the vdp/Mu block's "Gain" value, setting it to the values [-1 0 0.5 1 2]. Each iteration of the test will include a set of scope snapshots in the report.
Iteration_Value:
-1
Scope
Iteration_Value:
0
Scope
Iteration_Value:
0.5
Scope
Success! The conditioned signal has a maximum value of 2.20114, which lies in the desired range of greater than 2.1 and less than 3.
Iteration_Value:
1
Scope
Success! The conditioned signal has a maximum value of 2.67741, which lies in the desired range of greater than 2.1 and less than 3.
Iteration_Value:
2
Scope
Post-Test Analysis
2 values for vdp/Mu were found which resulted in a maximum signal value greater than 2.1 but less than 3. The following table shows those values and their resulting signal maximum.
Valid Iteration Values
Mu Value
Signal Maximum
0.5
2.20114
1
2.67741